ICENGINEWORKS HEADER MODELING PRODUCTS

ICENGINEWORKS HEADER MODELING PRODUCTS

SERIES 1625 (1-5/8″OD)


ICENGINEWORKS HEADER MODELING PRODUCTS

The icengineworks 1625 Series blocks are molded in blue ABS plastic and are available in 4 different shapes: a straight block (#1625-00), a 2” CLR block (#1625-20), a 3” CLR block (#1625-30) and a 4” CLR block (#1625-40).

Included also are 1625 Series block adapters (#1625BA) that allow any block to be attached to the open end of a 1-5/8”OD tube to get the tubular assembly design started at either end, downstream or upstream.

SERIES 1750 (1-3/4″OD)


ICENGINEWORKS HEADER MODELING PRODUCTS

The icengineworks 1750 Series blocks are molded in orange ABS plastic and are available in 5 different shapes: a straight block (#1750-00), a 2” CLR block (#1750-20), a 3” CLR block (#1750-30), a 4” CLR block (#1750-40) and a 6” CLR block (#1750-60).

Included also are 1750 Series block adapters (#1750BA) that allow any block to be attached to the open end of a 1-3/4”OD tube to get the tubular assembly design started at either end, downstream or upstream.

SERIES 1875 (CUT TOOL SYSTEM)


ICENGINEWORKS HEADER MODELING PRODUCTS

The icengineworks 1875Series is currently limited to the CUT tool system, cutting spacers, the 4-1 collector dummy and our innovative tack welding clamps.

SERIES 2000 (2″ OD)


ICENGINEWORKS HEADER MODELING PRODUCTS

These blocks, molded in yellow ABS plastic, are available in 4 different shapes: straight block (2000-00), 3” CLR (centerline radius) block (2000-30), 4” CLR block (2000-40) and 6” CLR block (2000-60).

Also includes 2000 Series block adapters (2000BA) to be attached to the open end of a 2” OD tube to start the tubular assembly design started either downstream or upstream.